iRobot Robot mop Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 83 problems covered.
Shop iRobot Robot mop parts at Amazon
All Robot mop codes across brands →
Not sure of the code? Tap along with it
If your iRobot Robot mop blinks or beeps a pattern instead of showing a code, tap the button in time with each blink or beep. A pause longer than a second and a half starts a new group - we will match the rhythm to a code.
Your rhythm: -
Finding your model number: it is on the underside label or in the app.
Braava 300 Series
All iRobot Braava 300 Series codes & guides → (14 covered)
- All lights flashing on NSI and buttons, robot beeping while charging — Incompatible charging adapter used — documented in the 380t manual's 'Error Indicators on the NSI while charging' chart, not in the current…
- Middle NSI blinks red 14 times — Braava detected that the motor was getting too hot during a cleaning cycle; the robot stops or will not start.
- Middle NSI blinks red 15 times — Per the iRobot support chart: Braava has experienced a sensor error, or it is stuck in a small area and cannot find its way out. The 380t…
- Middle NSI blinks red 2 times — Braava is stuck in a constricted area and cannot free itself. The 380t manual groups 2 to 6 blinks as 'stuck in its environment and cannot…
- Middle NSI blinks red 3 times — Braava was unable to return to where it started. iRobot's chart points to Cube location as what to check.
- Middle NSI blinks red 4 times — The NorthStar Navigation Cube was moved during the cleaning cycle — for example by a pet, a person, or another object while the robot was…
- Middle NSI blinks red 5 times — Braava detected a transition between floor surfaces (such as tile to carpet or a rug edge) and could not move away from it. iRobot's chart…
- Middle NSI blinks red 6 times — Braava dropped a wheel over a transition and cannot move. iRobot's chart points to cloth application as what to check.
- Middle NSI blinks red 7 times — Braava has experienced a charging error. The 380t manual's while-charging chart lists 7 or 8 blinks together as a charging error and says…
- Middle NSI blinks red 8 times while charging — A charging/power error while Braava is on the charger: iRobot says 8 red blinks of the middle NSI suggests a power issue. The support chart…
- Power button blinking red light — Battery status, not an NSI error: on the power button, a blinking red light means the battery is starting to get low. (The middle-NSI red…
- Power button solid red light — Battery status, not an NSI error: on the power button, a solid red light means the battery is low and needs to be recharged.
- Solid red light on middle NSI with 2-tone distress sound — System error while cleaning: one of the wheels is not moving. The 380t manual lists a solid red middle NSI as a system error, and notes…
- Solid red light on middle NSI with 3 beeps when Sweep or Mop is pressed — A sensor is activated, so Braava won't start driving when Sweep or Mop is pressed. iRobot's chart points to cloth application as what to…
Braava jet 240
All iRobot Braava jet 240 codes & guides → (11 covered)
- 2-tone distress sound + 1 beep — "Uh Oh" + one beep: Braava jet is stuck over an edge, is on a threshold or grate, or is on a dark surface. iRobot documents these beep…
- 2-tone distress sound + 10 beeps — "Uh Oh" + ten beeps: Braava jet has experienced an internal error. iRobot's chart and its dedicated article both give no user check for…
- 2-tone distress sound + 2 beeps — "Uh Oh" + two beeps: the bumper is being pressed in when trying to start a cycle.
- 2-tone distress sound + 3 beeps — "Uh Oh" + three beeps: no pad is installed, or the pad fell off during the cleaning cycle.
- 2-tone distress sound + 4 beeps — "Uh Oh" + four beeps: Braava jet moved as it tried to start — for example it was lifted or repositioned when CLEAN was pressed.
- 2-tone distress sound + 5 beeps — "Uh Oh" + five beeps: Braava jet is stuck — wedged under an obstacle or unable to move.
- 2-tone distress sound + 6 beeps — "Uh Oh" + six beeps: Braava jet is stuck with its wheel hanging over a step or threshold.
- 2-tone distress sound + 7 beeps — "Uh Oh" + seven beeps: the cleaning cycle timed out.
- 2-tone distress sound + 8 beeps — "Uh Oh" + eight beeps: the wheels cannot turn.
- 2-tone distress sound + 9 beeps — "Uh Oh" + nine beeps: the battery is experiencing an error. iRobot's 2-tone chart gives no user check for this code — it says to contact…
- Not spraying or spraying unevenly (Precision Jet Spray) — Not a beep code — the Braava jet Owner's Guide's Precision Jet Spray Troubleshooting item: if the robot is not spraying, or is spraying…
Braava jet m6
All iRobot Braava jet m6 codes & guides → (58 covered)
- Charging Error 1 — Charging Error 1: Braava does not detect a battery
- Charging Error 11 — Charging Error 11: A battery failure has been detected — battery hardware fault; the battery may need to be replaced
- Charging Error 17 — Charging Error 17: The battery may not be iRobot authentic
- Charging Error 19 — Charging Error 19: Charging timed out
- Charging Error 2 — Charging Error 2: A charge fault has been detected — over-current
- Charging Error 20 — Charging Error 20: Battery fault or battery not ready to charge
- Charging Error 21 — Charging Error 21: The robot docked but was unable to charge
- Charging Error 3 — Charging Error 3: A charge fault has been detected — charging system
- Charging Error 4 — Charging Error 4 and 5 (grouped by iRobot, not split): A low current fault has been detected with the dock or the robot
- Charging Error 5 — Charging Error 4 and 5 (grouped by iRobot, not split): A low current fault has been detected with the dock or the robot
- Charging Error 6 — Charging Error 6 and 7 (grouped by iRobot, not split): Braava's battery is either too warm or too cold for charging
- Charging Error 7 — Charging Error 6 and 7 (grouped by iRobot, not split): Braava's battery is either too warm or too cold for charging
- Charging Error 8 — Charging Error 8: Braava cannot communicate with its battery
- Charging Error 9 — Charging Error 9: A battery failure has been detected; the battery may need to be replaced
- Error 1 — The mop is on an obstacle or uneven surface and its left wheel is stuck or hanging off a transition — the light ring around the tank lid…
- Error 10 — Wheel problem. See the app for help: something is preventing the RIGHT wheel from sensing when it is being placed on the ground.
- Error 1003 — Please see the app for help: an internal communication issue (four-digit code on the m Series chart).
- Error 1010 — Please see the app for help: the robot cannot find the dock (four-digit code on the m Series chart).
- Error 12 — Drop off detected. Move to a new area, and then press Clean: the robot is stuck on a threshold or transition it is unable to drive over, or…
- Error 13 — Uneven ground. Place on a flat surface, and then press Clean: the robot is on an obstacle or uneven surface and both wheels are not sensing…
- Error 15 — Internal error (the chart gives no spoken message for this one): an internal communication error — the navigation board stopped talking.
- Error 16 — Move to a flat surface, then press Clean: the robot was bumped upon start, and the bumper is possibly dislodged.
- Error 17 — Navigation problem. See the app for help: the robot cannot complete cleaning and has cancelled its job — it ends its mission at a different…
- Error 18 — Docking problem. Place on the Home Base to charge: the m Series chart says the robot is stuck in the Home Base IR after undocking; iRobot's…
- Error 19 — Undocking problem. Clear obstacles, and then press Clean: the robot failed to undock from the Home Base and may have bumped something near…
- Error 21 — Please see the app for help: the robot lost communication with its mobility board. The chart's instruction is to reboot the robot.
- Error 22 — Move to a new area, then press Clean: a problem with the robot's surroundings — the chart lists the cause simply as the robot's environment.
- Error 24 — Place on a flat surface, then press Clean: the chart lists the cause as the robot's environment / surroundings.
- Error 25 — Please see the app for help: an internal board error. The chart's instruction is to reboot the robot.
- Error 29 — Please see the app for help: an error while upgrading software — iRobot's dedicated article says Error 29 means the robot was started while…
- Error 3 — Uneven ground. Place on a flat surface, and then press Clean: the robot is on an obstacle or uneven surface and the RIGHT wheel is stuck or…
- Error 32 — Please see the app for help: the Smart Map version on the robot does not match the map saved in the app. The chart's check is to reboot the…
- Error 33 — Move to a new area, then press Clean: the robot is unable to clean the path detailed in its Smart Map — the path may be blocked.
- Error 34 — Please see the app for help: an internal communications error. The chart's instruction is to reboot the robot.
- Error 35 — Mop-specific — Please see the app for help: an invalid pad, or a pad not attached. iRobot's dedicated article: the robot detected a pad not…
- Error 37 — Mop-specific — Fill the Tank: the tank is too low to start mopping and needs to be refilled. The robot announces it by voice ('Fill the…
- Error 38 — Please see the app for help: a power communications issue. The chart's instruction is to reboot the robot.
- Error 39 — Please see the app for help: a power communications issue — the chart lists Error 39 identically to Error 38. The chart's instruction is to…
- Error 4 — Clear the wheels, then press Clean: something is causing the LEFT wheel to stall when trying to start — the left wheel is jammed.
- Error 40 — The chart gives no spoken message for this one: the robot is stuck in a Virtual Wall beam.
- Error 41 — Please see the app for help: the mission timed out before completion. The chart's instruction is to press CLEAN to restart the mission, and…
- Error 42 — The chart gives no spoken message for this one: the robot failed to re-localize when direct cleaning.
- Error 43 — The chart gives no spoken message for this one: the robot was started in the Home Base IR halo while off the Home Base.
- Error 44 — Mop-specific — Pump issue. See the app for help: the pump motor did not start up when trying to wet mop — there is an issue with the pump…
- Error 45 — Mop-specific form of a shared code — Close the lid: the lid on the robot may be open, or the tank may not be in properly, at the start of a…
- Error 46 — Low Battery. Please charge: the robot ended its mission with a low battery while not on the dock, and the battery needs recharging before…
- Error 47 — Please see the app for help: a board issue. The chart's instruction is to reboot the robot.
- Error 5 — Clear the wheels, then press Clean: something is causing the RIGHT wheel to stall when trying to start — the right wheel is jammed.
- Error 50 — Mop-specific — Please see the app for help: pad detection time-out. The robot tried to detect the pad attached when beginning a cleaning…
- Error 6 — Drop off detected. Move to a new area, and then press Clean: the robot is stuck over an edge, is on a threshold, or is on a dark surface.
- Error 66 — Please see the app for help: the robot's memory limit has been reached. The chart gives no 'what to check' beyond memory itself.
- Error 68 — Please see the app for help: the camera failed during the cleaning job.
- Error 7 — Wheel problem. See the app for help: something is preventing the LEFT wheel from sensing when it is being placed on the ground.
- Error 73 — Mop-specific — Please see the app for help: the pad type changed during the cleaning job (for example the wet/dry pad the robot detects is…
- Error 74 — Please see the app for help: the area limit cleaned has been reached for this job.
- Error 75 — Please see the app for help: the robot is stuck around an obstacle and making no progress.
- Error 76 — Please see the app for help: an internal communication issue. The chart's check is to restart the mission.
- Error 9 — Tap the bumper to unstick, then press Clean: the bumper is jammed with debris or is dislodged.