iRobot Robot mop Braava jet m6 Error 45
What this problem usually means
Mop-specific form of a shared code — Close the lid: the lid on the robot may be open, or the tank may not be in properly, at the start of a cleaning job. (The same Error 45 article covers Roomba s Series, where it is the bin lid; on the m6 it is the tank lid.)
Likely causes
- Tank lid open or not securely latched at job start
- Debris in the tank well preventing the lid from closing properly
- Tank not seated properly
How to fix it — step by step
- Close the lid and make sure it is securely latched before cleaning
- If the lid is closed and the error persists, check the tank well for debris preventing the lid closing properly
- Remove any debris found, then reinstall the tank
- Contact iRobot Customer Care if the error persists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.