iRobot Robot mop Braava 300 Series Middle NSI blinks red 4 times

What it should look like on your machine

then it repeats

4 blinks - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

The NorthStar Navigation Cube was moved during the cleaning cycle — for example by a pet, a person, or another object while the robot was mapping and cleaning.

Likely causes

  1. Cube moved by a pet or person during the cycle
  2. Cube knocked or bumped while Braava was cleaning

How to fix it — step by step

  1. Put the Cube back on a raised surface where it will stay put
  2. Make sure the Cube is stationary while Braava is cleaning and cannot be moved by pets or people
  3. Restart the cleaning cycle
  4. Contact iRobot Customer Care if the problem persists

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava 300 Series problems

See all iRobot Braava 300 Series codes & guides →