iRobot Robot mop Braava 300 Series Solid red light on middle NSI with 3 beeps when Sweep or Mop is pressed
What it should sound like on your machine
then it repeats
3 beeps - then the pattern repeats. Count along with your machine and compare.
What this problem usually means
A sensor is activated, so Braava won't start driving when Sweep or Mop is pressed. iRobot's chart points to cloth application as what to check.
Likely causes
- Cleaning cloth bunched up or overflowing into the channel in the middle of the removable pad, stopping the pad connecting completely
- Wrong cloth type for the mode (white cloths are for dry sweep, blue cloths are for wet mop)
- Bumper not moving properly, or (Mint only) misaligned rubber baffle strips behind the bumper
How to fix it — step by step
- Remove and reapply the cleaning cloth, using the Braava microfiber cloth that came with Braava if you are using a different cloth
- Make sure the cloth does not bunch up or overflow into the channel in the middle of the removable pad
- Check the bumper moves properly: press in the left-front corner and release — it should return to its original position — and repeat on the right-front corner
- Mint only: remove the cleaning pad and make sure the rubber baffle strips lie flat along the inner edge behind the bumper, about 2 cm apart
- Contact iRobot Customer Care if the error persists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related iRobot Robot mop Braava 300 Series problems
- All lights flashing on NSI and buttons, robot beeping while charging
- Middle NSI blinks red 14 times
- Middle NSI blinks red 15 times
- Middle NSI blinks red 2 times
- Middle NSI blinks red 3 times
- Middle NSI blinks red 4 times
- Middle NSI blinks red 5 times
- Middle NSI blinks red 6 times
- Middle NSI blinks red 7 times
- Middle NSI blinks red 8 times while charging
- Power button blinking red light
- Power button solid red light