iRobot Robot mop Braava jet 240 Not spraying or spraying unevenly (Precision Jet Spray)

What this problem usually means

Not a beep code — the Braava jet Owner's Guide's Precision Jet Spray Troubleshooting item: if the robot is not spraying, or is spraying unevenly, after you have checked the tank has enough water and you can hear the pump running, the manual's instruction is to contact Customer Care. The same manual warns that cleaning solutions (even natural ones) can clog the spray nozzle, and its care section says to wipe the Precision Jet Spray nozzle clean with a damp cloth.

Likely causes

  1. Tank low or empty (the first check in the manual)
  2. Spray nozzle clogged or dirty
  3. Pump running but no spray — a fault past the manual's user checks

How to fix it — step by step

  1. Check the tank has enough water
  2. Listen for the pump running when the robot tries to spray
  3. Wipe the Precision Jet Spray nozzle clean with a damp cloth
  4. Use only water in the robot — cleaning solutions can clog the spray nozzle
  5. Contact iRobot Customer Care if it still does not spray or sprays unevenly with water in the tank and the pump running

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava jet 240 problems

See all iRobot Braava jet 240 codes & guides →