iRobot Robot mop Braava jet m6 Error 42

What this problem usually means

The chart gives no spoken message for this one: the robot failed to re-localize when direct cleaning.

Likely causes

  1. Robot could not re-establish its position during a direct-clean job

How to fix it — step by step

  1. Start the robot from the Home Base so it can localize, then press CLEAN to retry
  2. Contact iRobot Customer Care if the message persists

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava jet m6 problems

See all iRobot Braava jet m6 codes & guides →