iRobot Robot mop Braava 300 Series Middle NSI blinks red 7 times

What it should look like on your machine

then it repeats

7 blinks - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

Braava has experienced a charging error. The 380t manual's while-charging chart lists 7 or 8 blinks together as a charging error and says to contact Customer Support; iRobot's support procedure for 7 blinks gives battery, charger and outlet checks first.

Likely causes

  1. Charging error in the charging system
  2. Non-authorized battery or charger in use
  3. Outlet not working, or an outlet on a dimmer switch
  4. Fault in the charging cradle (on models using one)

How to fix it — step by step

  1. Verify you are using an authorized iRobot battery and charger
  2. Verify the outlet works by testing it with another appliance — outlets with a dimmer switch may not work with the charger
  3. If you are using a charging cradle, try plugging the charger directly into the robot instead
  4. Contact iRobot Customer Care if the error persists

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava 300 Series problems

See all iRobot Braava 300 Series codes & guides →