iRobot Robot mop Braava jet 240 2-tone distress sound + 4 beeps

What it should sound like on your machine

then it repeats

4 beeps - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

"Uh Oh" + four beeps: Braava jet moved as it tried to start — for example it was lifted or repositioned when CLEAN was pressed.

Likely causes

  1. Robot held or moved while trying to start a cycle

How to fix it — step by step

  1. Set the robot down and restart it by pressing CLEAN
  2. Make sure you are not holding or moving the robot when you press CLEAN
  3. Contact iRobot Customer Care if the problem persists

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava jet 240 problems

See all iRobot Braava jet 240 codes & guides →