iRobot Robot mop Braava jet m6 Error 35
What this problem usually means
Mop-specific — Please see the app for help: an invalid pad, or a pad not attached. iRobot's dedicated article: the robot detected a pad not compatible for the robot, so it is not recognizing the cleaning pad. (On Roomba charts Error 35 is a Combo-only 'incompatible pad' code; on the m6 it is the standard pad-recognition error.)
Likely causes
- Pad not compatible with the Braava jet m Series
- Pad not attached, or the pad reading sensor is dirty
How to fix it — step by step
- Remove the pad
- Wipe the pad reading sensor clean
- Reinstall the pad — it must be an authentic iRobot Braava jet m Series dry or wet pad
- If the error persists, try a new pad
- Contact iRobot Customer Care if it persists with a new authentic pad
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the cleaning pad.
Parts that commonly fix it
- cleaning pad - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.