iRobot Robot mop Braava jet m6 Error 13

What this problem usually means

Uneven ground. Place on a flat surface, and then press Clean: the robot is on an obstacle or uneven surface and both wheels are not sensing the ground when placed down.

Likely causes

  1. Robot on an obstacle or uneven surface
  2. Both wheels not sensing the ground

How to fix it — step by step

  1. Place the robot on a flat surface with both wheels firmly on the floor
  2. Check underneath for debris or an obstacle lifting the robot
  3. Press CLEAN to restart
  4. Contact iRobot Customer Care if the message persists

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava jet m6 problems

See all iRobot Braava jet m6 codes & guides →