iRobot Robot mop Braava 300 Series Middle NSI blinks red 15 times

What it should look like on your machine

then it repeats

15 blinks - then the pattern repeats. Count along with your machine and compare.

What this problem usually means

Per the iRobot support chart: Braava has experienced a sensor error, or it is stuck in a small area and cannot find its way out. The 380t manual describes 15 blinks the second way — stuck in too small an area and cannot free itself. (iRobot's own dedicated 15-blinks article and one row of its care page repeat the 14-blink motor-hot text instead — see research notes; the chart and manual agree on the stuck/sensor meaning.)

Likely causes

  1. Robot stuck in too small an area and cannot free itself
  2. Sensor error
  3. Cleaning cloth application problem (the chart's 'what to check')

How to fix it — step by step

  1. Remove Braava from the situation and restart it in a new, larger area
  2. Check the cleaning cloth is properly applied — not bunching up or overflowing into the middle channel of the removable pad
  3. Contact iRobot Customer Care if the problem persists

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava 300 Series problems

See all iRobot Braava 300 Series codes & guides →