iRobot Robot mop Braava jet m6 Error 12
What this problem usually means
Drop off detected. Move to a new area, and then press Clean: the robot is stuck on a threshold or transition it is unable to drive over, or is on a dark surface.
Likely causes
- Robot stuck on a threshold or transition it cannot drive over
- Dark surface being read as a drop-off
How to fix it — step by step
- Move the robot to a new area away from the threshold or transition
- Check the cliff sensors and wipe them clean
- Press CLEAN to restart
- Contact iRobot Customer Care if the message persists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.