iRobot Robot mop Braava jet m6 Error 17

What this problem usually means

Navigation problem. See the app for help: the robot cannot complete cleaning and has cancelled its job — it ends its mission at a different location than the Home Base or starting point.

Likely causes

  1. Robot got lost and ended the mission away from the Home Base or starting point
  2. Room too dark for the localization camera to navigate

How to fix it — step by step

  1. Make sure the house has adequate light (daylight or dim lighting is sufficient) for the robot to navigate
  2. Move the Home Base to a different location if it keeps happening
  3. Start the robot from the Home Base and press CLEAN to retry

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related iRobot Robot mop Braava jet m6 problems

See all iRobot Braava jet m6 codes & guides →