iRobot Braava jet m6 Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 58 problems covered.
Shop iRobot Braava jet m6 parts at Amazon
- Charging Error 1 — Charging Error 1: Braava does not detect a battery
- Charging Error 11 — Charging Error 11: A battery failure has been detected — battery hardware fault; the battery may need to be replaced
- Charging Error 17 — Charging Error 17: The battery may not be iRobot authentic
- Charging Error 19 — Charging Error 19: Charging timed out
- Charging Error 2 — Charging Error 2: A charge fault has been detected — over-current
- Charging Error 20 — Charging Error 20: Battery fault or battery not ready to charge
- Charging Error 21 — Charging Error 21: The robot docked but was unable to charge
- Charging Error 3 — Charging Error 3: A charge fault has been detected — charging system
- Charging Error 4 — Charging Error 4 and 5 (grouped by iRobot, not split): A low current fault has been detected with the dock or the robot
- Charging Error 5 — Charging Error 4 and 5 (grouped by iRobot, not split): A low current fault has been detected with the dock or the robot
- Charging Error 6 — Charging Error 6 and 7 (grouped by iRobot, not split): Braava's battery is either too warm or too cold for charging
- Charging Error 7 — Charging Error 6 and 7 (grouped by iRobot, not split): Braava's battery is either too warm or too cold for charging
- Charging Error 8 — Charging Error 8: Braava cannot communicate with its battery
- Charging Error 9 — Charging Error 9: A battery failure has been detected; the battery may need to be replaced
- Error 1 — The mop is on an obstacle or uneven surface and its left wheel is stuck or hanging off a transition — the light ring around the tank lid…
- Error 10 — Wheel problem. See the app for help: something is preventing the RIGHT wheel from sensing when it is being placed on the ground.
- Error 1003 — Please see the app for help: an internal communication issue (four-digit code on the m Series chart).
- Error 1010 — Please see the app for help: the robot cannot find the dock (four-digit code on the m Series chart).
- Error 12 — Drop off detected. Move to a new area, and then press Clean: the robot is stuck on a threshold or transition it is unable to drive over, or…
- Error 13 — Uneven ground. Place on a flat surface, and then press Clean: the robot is on an obstacle or uneven surface and both wheels are not sensing…
- Error 15 — Internal error (the chart gives no spoken message for this one): an internal communication error — the navigation board stopped talking.
- Error 16 — Move to a flat surface, then press Clean: the robot was bumped upon start, and the bumper is possibly dislodged.
- Error 17 — Navigation problem. See the app for help: the robot cannot complete cleaning and has cancelled its job — it ends its mission at a different…
- Error 18 — Docking problem. Place on the Home Base to charge: the m Series chart says the robot is stuck in the Home Base IR after undocking; iRobot's…
- Error 19 — Undocking problem. Clear obstacles, and then press Clean: the robot failed to undock from the Home Base and may have bumped something near…
- Error 21 — Please see the app for help: the robot lost communication with its mobility board. The chart's instruction is to reboot the robot.
- Error 22 — Move to a new area, then press Clean: a problem with the robot's surroundings — the chart lists the cause simply as the robot's environment.
- Error 24 — Place on a flat surface, then press Clean: the chart lists the cause as the robot's environment / surroundings.
- Error 25 — Please see the app for help: an internal board error. The chart's instruction is to reboot the robot.
- Error 29 — Please see the app for help: an error while upgrading software — iRobot's dedicated article says Error 29 means the robot was started while…
- Error 3 — Uneven ground. Place on a flat surface, and then press Clean: the robot is on an obstacle or uneven surface and the RIGHT wheel is stuck or…
- Error 32 — Please see the app for help: the Smart Map version on the robot does not match the map saved in the app. The chart's check is to reboot the…
- Error 33 — Move to a new area, then press Clean: the robot is unable to clean the path detailed in its Smart Map — the path may be blocked.
- Error 34 — Please see the app for help: an internal communications error. The chart's instruction is to reboot the robot.
- Error 35 — Mop-specific — Please see the app for help: an invalid pad, or a pad not attached. iRobot's dedicated article: the robot detected a pad not…
- Error 37 — Mop-specific — Fill the Tank: the tank is too low to start mopping and needs to be refilled. The robot announces it by voice ('Fill the…
- Error 38 — Please see the app for help: a power communications issue. The chart's instruction is to reboot the robot.
- Error 39 — Please see the app for help: a power communications issue — the chart lists Error 39 identically to Error 38. The chart's instruction is to…
- Error 4 — Clear the wheels, then press Clean: something is causing the LEFT wheel to stall when trying to start — the left wheel is jammed.
- Error 40 — The chart gives no spoken message for this one: the robot is stuck in a Virtual Wall beam.
- Error 41 — Please see the app for help: the mission timed out before completion. The chart's instruction is to press CLEAN to restart the mission, and…
- Error 42 — The chart gives no spoken message for this one: the robot failed to re-localize when direct cleaning.
- Error 43 — The chart gives no spoken message for this one: the robot was started in the Home Base IR halo while off the Home Base.
- Error 44 — Mop-specific — Pump issue. See the app for help: the pump motor did not start up when trying to wet mop — there is an issue with the pump…
- Error 45 — Mop-specific form of a shared code — Close the lid: the lid on the robot may be open, or the tank may not be in properly, at the start of a…
- Error 46 — Low Battery. Please charge: the robot ended its mission with a low battery while not on the dock, and the battery needs recharging before…
- Error 47 — Please see the app for help: a board issue. The chart's instruction is to reboot the robot.
- Error 5 — Clear the wheels, then press Clean: something is causing the RIGHT wheel to stall when trying to start — the right wheel is jammed.
- Error 50 — Mop-specific — Please see the app for help: pad detection time-out. The robot tried to detect the pad attached when beginning a cleaning…
- Error 6 — Drop off detected. Move to a new area, and then press Clean: the robot is stuck over an edge, is on a threshold, or is on a dark surface.
- Error 66 — Please see the app for help: the robot's memory limit has been reached. The chart gives no 'what to check' beyond memory itself.
- Error 68 — Please see the app for help: the camera failed during the cleaning job.
- Error 7 — Wheel problem. See the app for help: something is preventing the LEFT wheel from sensing when it is being placed on the ground.
- Error 73 — Mop-specific — Please see the app for help: the pad type changed during the cleaning job (for example the wet/dry pad the robot detects is…
- Error 74 — Please see the app for help: the area limit cleaned has been reached for this job.
- Error 75 — Please see the app for help: the robot is stuck around an obstacle and making no progress.
- Error 76 — Please see the app for help: an internal communication issue. The chart's check is to restart the mission.
- Error 9 — Tap the bumper to unstick, then press Clean: the bumper is jammed with debris or is dislodged.