Neato Robot vacuum Common Problems
Find your problem in the list below. Each page explains the most likely causes, step-by-step checks you can do yourself, when to call a pro, and the parts that commonly resolve it. 208 problems covered.
Shop Neato Robot vacuum parts at Amazon
All Robot vacuum codes across brands →
Finding your model number: it is on the underside label or in the app.
Botvac 65
All Neato Botvac 65 codes & guides → (23 covered)
- I had to reset. Please press OKAY to restart — An error occurred and the robot had to reset itself.
- My Brush needs to be cleaned — The brush is still moving, but with difficulty because of accumulated debris.
- My bumper is stuck. Please free it — The bumper or a bumper sensor is being triggered / stuck.
- My fan is stuck. Please press OKAY to restart — The blower (vacuum fan) is not working properly.
- My left wheel is stuck. Please free it from debris — The left wheel is stuck and the robot is having mobility problems.
- My right wheel is stuck. Please free it from debris — The right wheel is stuck and the robot is having mobility problems.
- Please clean my Brush — The brush is stuck with debris.
- Please clean my left drop sensor window — The left drop sensor window on the underside of the robot needs to be cleaned.
- Please clean my right drop sensor window — The right drop sensor window on the underside of the robot needs to be cleaned.
- Please contact Customer Support. Tests not complete — The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care…
- Please dust me off so I can see — The robot cannot sense the environment because the laser is blocked.
- Please open my dirt bin & push switch DOWN to ON — Alert (not a hard error): the battery switch is set to OFF, so the battery is not charging and the robot cannot run.
- Please press OKAY to continue. Battery issue (0002) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to continue. Battery issue (0008) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0009) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (8000) — The battery is experiencing an error.
- Please put me down on the floor — The robot was picked up; it must be returned to the floor to resume operation.
- Please wait while I cool down my battery — The battery is overheated. The manual says this may be caused by direct sunlight or an unusually warm environment.
Botvac 70e
All Neato Botvac 70e codes & guides → (23 covered)
- I had to reset. Please press OKAY to restart — An error occurred and the robot had to reset itself.
- My Brush needs to be cleaned — The brush is still moving, but with difficulty because of accumulated debris.
- My bumper is stuck. Please free it — The bumper or a bumper sensor is being triggered / stuck.
- My fan is stuck. Please press OKAY to restart — The blower (vacuum fan) is not working properly.
- My left wheel is stuck. Please free it from debris — The left wheel is stuck and the robot is having mobility problems.
- My right wheel is stuck. Please free it from debris — The right wheel is stuck and the robot is having mobility problems.
- Please clean my Brush — The brush is stuck with debris.
- Please clean my left drop sensor window — The left drop sensor window on the underside of the robot needs to be cleaned.
- Please clean my right drop sensor window — The right drop sensor window on the underside of the robot needs to be cleaned.
- Please contact Customer Support. Tests not complete — The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care…
- Please dust me off so I can see — The robot cannot sense the environment because the laser is blocked.
- Please open my dirt bin & push switch DOWN to ON — Alert (not a hard error): the battery switch is set to OFF, so the battery is not charging and the robot cannot run.
- Please press OKAY to continue. Battery issue (0002) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to continue. Battery issue (0008) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0009) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (8000) — The battery is experiencing an error.
- Please put me down on the floor — The robot was picked up; it must be returned to the floor to resume operation.
- Please wait while I cool down my battery — The battery is overheated. The manual says this may be caused by direct sunlight or an unusually warm environment.
Botvac 75
All Neato Botvac 75 codes & guides → (23 covered)
- I had to reset. Please press OKAY to restart — An error occurred and the robot had to reset itself.
- My Brush needs to be cleaned — The brush is still moving, but with difficulty because of accumulated debris.
- My bumper is stuck. Please free it — The bumper or a bumper sensor is being triggered / stuck.
- My fan is stuck. Please press OKAY to restart — The blower (vacuum fan) is not working properly.
- My left wheel is stuck. Please free it from debris — The left wheel is stuck and the robot is having mobility problems.
- My right wheel is stuck. Please free it from debris — The right wheel is stuck and the robot is having mobility problems.
- Please clean my Brush — The brush is stuck with debris.
- Please clean my left drop sensor window — The left drop sensor window on the underside of the robot needs to be cleaned.
- Please clean my right drop sensor window — The right drop sensor window on the underside of the robot needs to be cleaned.
- Please contact Customer Support. Tests not complete — The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care…
- Please dust me off so I can see — The robot cannot sense the environment because the laser is blocked.
- Please open my dirt bin & push switch DOWN to ON — Alert (not a hard error): the battery switch is set to OFF, so the battery is not charging and the robot cannot run.
- Please press OKAY to continue. Battery issue (0002) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to continue. Battery issue (0008) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0009) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (8000) — The battery is experiencing an error.
- Please put me down on the floor — The robot was picked up; it must be returned to the floor to resume operation.
- Please wait while I cool down my battery — The battery is overheated. The manual says this may be caused by direct sunlight or an unusually warm environment.
Botvac 80
All Neato Botvac 80 codes & guides → (25 covered)
- Error 4000 — Error 4000: the LIDAR reports objects about 0.5m away in the middle of an open room - false readings from a misaligned laser sensor. One…
- I had to reset. Please press OKAY to restart — An error occurred and the robot had to reset itself.
- My Brush needs to be cleaned — The brush is still moving, but with difficulty because of accumulated debris.
- My bumper is stuck. Please free it — The bumper or a bumper sensor is being triggered / stuck.
- My fan is stuck. Please press OKAY to restart — The blower (vacuum fan) is not working properly.
- My left wheel is stuck. Please free it from debris — The left wheel is stuck and the robot is having mobility problems.
- My right wheel is stuck. Please free it from debris — The right wheel is stuck and the robot is having mobility problems.
- Please clean my Brush — The brush is stuck with debris.
- Please clean my left drop sensor window — The left drop sensor window on the underside of the robot needs to be cleaned.
- Please clean my right drop sensor window — The right drop sensor window on the underside of the robot needs to be cleaned.
- Please contact Customer Support. Tests not complete — The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care…
- Please dust me off so I can see — The robot cannot sense the environment because the laser is blocked.
- Please open my dirt bin & push switch DOWN to ON — Alert (not a hard error): the battery switch is set to OFF, so the battery is not charging and the robot cannot run.
- Please press OKAY to continue (3000) — The robot tries to get ready to start but stops and will not start moving. On iFixit, accepted answers for the Botvac 80 trace this to the…
- Please press OKAY to continue. Battery issue (0002) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to continue. Battery issue (0008) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0009) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (8000) — The battery is experiencing an error.
- Please put me down on the floor — The robot was picked up; it must be returned to the floor to resume operation.
- Please wait while I cool down my battery — The battery is overheated. The manual says this may be caused by direct sunlight or an unusually warm environment.
Botvac 85
All Neato Botvac 85 codes & guides → (24 covered)
- I had to reset. Please press OKAY to restart — An error occurred and the robot had to reset itself.
- My Brush needs to be cleaned — The brush is still moving, but with difficulty because of accumulated debris.
- My bumper is stuck. Please free it — The bumper or a bumper sensor is being triggered / stuck.
- My fan is stuck. Please press OKAY to restart — The blower (vacuum fan) is not working properly.
- My left wheel is stuck. Please free it from debris — The left wheel is stuck and the robot is having mobility problems.
- My right wheel is stuck. Please free it from debris — The right wheel is stuck and the robot is having mobility problems.
- Please clean my Brush — The brush is stuck with debris.
- Please clean my left drop sensor window — The left drop sensor window on the underside of the robot needs to be cleaned.
- Please clean my right drop sensor window — The right drop sensor window on the underside of the robot needs to be cleaned.
- Please contact Customer Support. Tests not complete — The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care…
- Please dust me off so I can see — The robot cannot sense the environment because the laser is blocked.
- Please open my dirt bin & push switch DOWN to ON — Alert (not a hard error): the battery switch is set to OFF, so the battery is not charging and the robot cannot run.
- Please press OKAY to continue (3000) — The robot tries to get ready to start but stops and will not start moving. On iFixit, accepted answers for the Botvac 80 trace this to the…
- Please press OKAY to continue. Battery issue (0002) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to continue. Battery issue (0008) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0009) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (8000) — The battery is experiencing an error.
- Please put me down on the floor — The robot was picked up; it must be returned to the floor to resume operation.
- Please wait while I cool down my battery — The battery is overheated. The manual says this may be caused by direct sunlight or an unusually warm environment.
Botvac Connected
All Neato Botvac Connected codes & guides → (25 covered)
- I had to reset. Please press OKAY to restart — An error occurred and the robot had to reset itself.
- My Brush needs to be cleaned — The brush is still moving, but with difficulty because of accumulated debris.
- My bumper is stuck. Please free it — The bumper or a bumper sensor is being triggered / stuck.
- My fan is stuck. Please press OKAY to restart — The blower (vacuum fan) is not working properly.
- My left wheel is stuck. Please free it from debris — The left wheel is stuck and the robot is having mobility problems.
- My right wheel is stuck. Please free it from debris — The right wheel is stuck and the robot is having mobility problems.
- Please clean my Brush — The brush is stuck with debris.
- Please clean my left drop sensor window — The left drop sensor window on the underside of the robot needs to be cleaned.
- Please clean my right drop sensor window — The right drop sensor window on the underside of the robot needs to be cleaned.
- Please contact Customer Support. Tests not complete — The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care…
- Please dust me off so I can see — The robot cannot sense the environment because the laser is blocked.
- Please open my dirt bin & push switch DOWN to ON — Alert (not a hard error): the battery switch is set to OFF, so the battery is not charging and the robot cannot run.
- Please press OKAY to continue (2010) — Error 2010 'please clear my path' appearing right at start-up, when the path is actually clear.
- Please press OKAY to continue (3000) — A numbered 'press OK to continue' error. Cleaners Talk, summarising Neato support guidance, lists this numbered-code family for Botvac…
- Please press OKAY to continue. Battery issue (0002) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. In the manual, codes 0005 and 0006 are grouped together with this same meaning.
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to continue. Battery issue (0008) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (0009) — The battery is not properly connected. In the manual, codes 0002, 0008 and 0009 are grouped together with this same meaning and fix.
- Please press OKAY to continue. Battery issue (8000) — The battery is experiencing an error.
- Please put me down on the floor — The robot was picked up; it must be returned to the floor to resume operation.
- Please wait while I cool down my battery — The battery is overheated. The manual says this may be caused by direct sunlight or an unusually warm environment.
Botvac D10
All Neato Botvac D10 codes & guides → (6 covered)
- Battery LED - Fast blinking red — The battery has a fault and must be serviced. The D8/D9/D10 user guide gives this same meaning whether the robot is on or off the charging…
- Battery LED - Slow pulsing red (on the charging base) — Battery power is critically low and the battery is charging.
- Battery LED - Steady red (off the charging base) — The battery level is critically low.
- Battery LED - Yellow (off the charging base) — The battery level is low.
- Play Button LED - Red sustained — An error has occurred. The guide does not name the specific error in the LED table - it directs you to press the Info button to find out…
- Wi-Fi LED - Off — Neato is not connected to Wi-Fi.
Botvac D3
All Neato Botvac D3 codes & guides → (7 covered)
- batt_deep_discharge (message in the Neato app) — The battery is deeply discharged / reported dead. Reported in the app on D3 and D7 units on iFixit, and covered for the whole D3-D7 series…
- Battery LED - Blinking Red — The robot battery has experienced an error. The D5/D7 manual's only instruction for this pattern is to contact Customer Care — but Neato…
- Error 3000 — Error 3000 on a Botvac D3: the LDS turret spins at varying speeds and the scan comes back mostly as error 8080 - the laser is not producing…
- House Clean / Spot Clean LED - Blinking Red (Info LED Blinking Red on some models) — Your robot needs to be cleaned to operate at best performance (maintenance needed).
- House Clean / Spot Clean LED - Solid Red (Info LED Solid Red on some models) — The robot is having difficulty navigating the environment. The D5/D7 manual lists possible reasons: the laser is blocked, it is having…
- Robot Offline (message in the Neato app) — The robot has disconnected from its Wi-Fi connection, OR your phone/tablet is not connected to 3G/4G service.
- Wi-Fi LED - Fast Blinking Red — Error connecting to Wi-Fi. The D7 manual lists this pattern under Wi-Fi LED meanings; if already paired, fast blinking can also mean the…
Botvac D4
All Neato Botvac D4 codes & guides → (6 covered)
- batt_deep_discharge (message in the Neato app) — The battery is deeply discharged / reported dead. Reported in the app on D3 and D7 units on iFixit, and covered for the whole D3-D7 series…
- Battery LED - Blinking Red — The robot battery has experienced an error. The D5/D7 manual's only instruction for this pattern is to contact Customer Care — but Neato…
- House Clean / Spot Clean LED - Blinking Red (Info LED Blinking Red on some models) — Your robot needs to be cleaned to operate at best performance (maintenance needed).
- House Clean / Spot Clean LED - Solid Red (Info LED Solid Red on some models) — The robot is having difficulty navigating the environment. The D5/D7 manual lists possible reasons: the laser is blocked, it is having…
- Robot Offline (message in the Neato app) — The robot has disconnected from its Wi-Fi connection, OR your phone/tablet is not connected to 3G/4G service.
- Wi-Fi LED - Fast Blinking Red — Error connecting to Wi-Fi. The D7 manual lists this pattern under Wi-Fi LED meanings; if already paired, fast blinking can also mean the…
Botvac D5
All Neato Botvac D5 codes & guides → (6 covered)
- batt_deep_discharge (message in the Neato app) — The battery is deeply discharged / reported dead. Reported in the app on D3 and D7 units on iFixit, and covered for the whole D3-D7 series…
- Battery LED - Blinking Red — The robot battery has experienced an error. The D5/D7 manual's only instruction for this pattern is to contact Customer Care — but Neato…
- House Clean / Spot Clean LED - Blinking Red (Info LED Blinking Red on some models) — Your robot needs to be cleaned to operate at best performance (maintenance needed).
- House Clean / Spot Clean LED - Solid Red (Info LED Solid Red on some models) — The robot is having difficulty navigating the environment. The D5/D7 manual lists possible reasons: the laser is blocked, it is having…
- Robot Offline (message in the Neato app) — The robot has disconnected from its Wi-Fi connection, OR your phone/tablet is not connected to 3G/4G service.
- Wi-Fi LED - Fast Blinking Red — Error connecting to Wi-Fi. The D7 manual lists this pattern under Wi-Fi LED meanings; if already paired, fast blinking can also mean the…
Botvac D6
All Neato Botvac D6 codes & guides → (6 covered)
- batt_deep_discharge (message in the Neato app) — The battery is deeply discharged / reported dead. Reported in the app on D3 and D7 units on iFixit, and covered for the whole D3-D7 series…
- Battery LED - Blinking Red — The robot battery has experienced an error. The D5/D7 manual's only instruction for this pattern is to contact Customer Care — but Neato…
- House Clean / Spot Clean LED - Blinking Red (Info LED Blinking Red on some models) — Your robot needs to be cleaned to operate at best performance (maintenance needed).
- House Clean / Spot Clean LED - Solid Red (Info LED Solid Red on some models) — The robot is having difficulty navigating the environment. The D5/D7 manual lists possible reasons: the laser is blocked, it is having…
- Robot Offline (message in the Neato app) — The robot has disconnected from its Wi-Fi connection, OR your phone/tablet is not connected to 3G/4G service.
- Wi-Fi LED - Fast Blinking Red — Error connecting to Wi-Fi. The D7 manual lists this pattern under Wi-Fi LED meanings; if already paired, fast blinking can also mean the…
Botvac D7
All Neato Botvac D7 codes & guides → (7 covered)
- batt_deep_discharge (message in the Neato app) — The battery is deeply discharged / reported dead. Reported in the app on D3 and D7 units on iFixit, and covered for the whole D3-D7 series…
- Battery LED - Blinking Red — The robot battery has experienced an error. The D5/D7 manual's only instruction for this pattern is to contact Customer Care — but Neato…
- Error 3000 — Reported on a Botvac D7 Connected on iFixit: the robot leaves the base, the motor spins up and drops repeatedly, then displays error 3000…
- House Clean / Spot Clean LED - Blinking Red (Info LED Blinking Red on some models) — Your robot needs to be cleaned to operate at best performance (maintenance needed).
- House Clean / Spot Clean LED - Solid Red (Info LED Solid Red on some models) — The robot is having difficulty navigating the environment. The D5/D7 manual lists possible reasons: the laser is blocked, it is having…
- Robot Offline (message in the Neato app) — The robot has disconnected from its Wi-Fi connection, OR your phone/tablet is not connected to 3G/4G service.
- Wi-Fi LED - Fast Blinking Red — Error connecting to Wi-Fi. The D7 manual lists this pattern under Wi-Fi LED meanings; if already paired, fast blinking can also mean the…
Botvac D8
All Neato Botvac D8 codes & guides → (6 covered)
- Battery LED - Fast blinking red — The battery has a fault and must be serviced. The D8/D9/D10 user guide gives this same meaning whether the robot is on or off the charging…
- Battery LED - Slow pulsing red (on the charging base) — Battery power is critically low and the battery is charging.
- Battery LED - Steady red (off the charging base) — The battery level is critically low.
- Battery LED - Yellow (off the charging base) — The battery level is low.
- Play Button LED - Red sustained — An error has occurred. The guide does not name the specific error in the LED table - it directs you to press the Info button to find out…
- Wi-Fi LED - Off — Neato is not connected to Wi-Fi.
Botvac D9
All Neato Botvac D9 codes & guides → (6 covered)
- Battery LED - Fast blinking red — The battery has a fault and must be serviced. The D8/D9/D10 user guide gives this same meaning whether the robot is on or off the charging…
- Battery LED - Slow pulsing red (on the charging base) — Battery power is critically low and the battery is charging.
- Battery LED - Steady red (off the charging base) — The battery level is critically low.
- Battery LED - Yellow (off the charging base) — The battery level is low.
- Play Button LED - Red sustained — An error has occurred. The guide does not name the specific error in the LED table - it directs you to press the Info button to find out…
- Wi-Fi LED - Off — Neato is not connected to Wi-Fi.
XV Series
All Neato XV Series codes & guides → (15 covered)
- Flashing orange light - robot thinks it is charging off the dock — The charge light flashes orange and the robot behaves as if it is charging even when it is not on the dock. The usual cause is a failed D14…
- I had to reset. Please press OKAY to restart — The robot encountered an internal error and had to reset itself.
- My battery has a critical error — The robot reports a critical battery error, in some cases on a new or newly charged pack. Multiple owners fixed it by charging the packs…
- My vision was blocked. Please press OKAY (1000) — The laser sensor (LDS) that measures distance to objects is experiencing problems. Neato's support table groups this message with codes…
- My vision was blocked. Please press OKAY (2000) — The laser sensor (LDS) that measures distance to objects is experiencing problems. Neato's support table groups this message with codes…
- My vision was blocked. Please press OKAY (3000) — Error 3000 'My vision was blocked' when the laser turret (LDS) is not spinning or not reporting. The recurring root cause is the LDS spin…
- My vision was blocked. Please press OKAY (4000) — The laser sensor (LDS) that measures distance to objects is experiencing problems. Neato's support table groups this message with codes…
- Please press OKAY to continue. Battery issue (0003) — The battery is low or needs to be charged. Neato's support table groups codes 0003 and 0004 together with this same meaning.
- Please press OKAY to continue. Battery issue (0004) — Battery issue 0004 on the XV series. The recovery procedure below is the one Neato support gave owners: it is a charge-system and gauge…
- Please press OKAY to continue. Battery issue (0005) — There is an issue with the battery. Neato's support table groups codes 0005 and 0006 together and gives no user fix for them beyond…
- Please press OKAY to continue. Battery issue (0006) — There is an issue with the battery. Neato's support table groups codes 0005 and 0006 together and gives no user fix for them beyond…
- Please press OKAY to continue. Battery issue (0007) — The robot is too cold, or in an environment that is too cold for it to operate properly.
- Please press OKAY to restart. Battery issue (0002) — The robot is turned off or the battery is not connected. Neato's support table groups codes 0002, 0008 and 0009 together with this same…
- Please press OKAY to restart. Battery issue (0008) — The robot is turned off or the battery is not connected. Neato's support table groups codes 0002, 0008 and 0009 together with this same…
- Please press OKAY to restart. Battery issue (0009) — The robot is turned off or the battery is not connected. Neato's support table groups codes 0002, 0008 and 0009 together with this same…