Neato Robot vacuum Botvac Connected Please press OKAY to continue. Battery issue (0007)
What this problem usually means
The robot is too cold, or in an environment that is too cold for it to operate properly.
Likely causes
- Room / charging area too cold
- Robot stored in a cold space
How to fix it — step by step
- Charge the robot in a warmer environment
- Move the charge base to a warmer room and try again
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Neato Robot vacuum Botvac Connected problems
- Please press OKAY to continue. Battery issue (0008)
- Please press OKAY to continue. Battery issue (0009)
- Please press OKAY to continue. Battery issue (8000)
- Please put me down on the floor
- Please wait while I cool down my battery
- I had to reset. Please press OKAY to restart
- My Brush needs to be cleaned
- My bumper is stuck. Please free it
- My fan is stuck. Please press OKAY to restart
- My left wheel is stuck. Please free it from debris
- My right wheel is stuck. Please free it from debris
- Please clean my Brush