Neato Robot vacuum Botvac 70e Please press OKAY to continue. Battery issue (0004)
What this problem usually means
The battery is low or needs to be charged. In the manual, codes 0003 and 0004 are grouped together with this same meaning.
Likely causes
- Battery discharged
- Battery too low to clean
How to fix it — step by step
- Press OKAY
- Put the robot on the charge base until the status light turns green
- If the issue persists, take the robot to an independent vacuum repair shop — Neato shut down in 2023, so its Customer Care and warranty service no longer exist
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Neato Robot vacuum Botvac 70e problems
- Please press OKAY to continue. Battery issue (0005)
- Please press OKAY to continue. Battery issue (0006)
- Please press OKAY to continue. Battery issue (0007)
- Please press OKAY to continue. Battery issue (0008)
- Please press OKAY to continue. Battery issue (0009)
- Please press OKAY to continue. Battery issue (8000)
- Please put me down on the floor
- Please wait while I cool down my battery
- I had to reset. Please press OKAY to restart
- My Brush needs to be cleaned
- My bumper is stuck. Please free it
- My fan is stuck. Please press OKAY to restart