Neato Robot vacuum Botvac D6 Robot Offline (message in the Neato app)
What this problem usually means
The robot has disconnected from its Wi-Fi connection, OR your phone/tablet is not connected to 3G/4G service.
Likely causes
- Robot lost Wi-Fi connection
- Weak Wi-Fi signal
- Phone/tablet not connected to mobile data / Wi-Fi
How to fix it — step by step
- Make sure your phone/tablet is connected - if it is not, the app will say the robot is OFFLINE
- Reset the robot: take it off its base, hold the Start Button for 10 seconds to turn it off, then press Start again to turn it on; wait a few minutes and check the app for READY TO CLEAN
- If that does not fix it, delete the robot from the Neato app and connect it again
- If the issue persists, take the robot to an independent vacuum repair shop — Neato shut down in 2023, so its Customer Care and warranty service no longer exist
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.