Neato Robot vacuum Botvac 65 Please contact Customer Support. Tests not complete
What this problem usually means
The robot's self-tests did not complete; the manual says Botvac needs to be inspected for errors, and lists this as a contact Customer Care fault. Neato shut down in 2023, so that route no longer exists — an independent vacuum repair shop is the route that remains.
Likely causes
- Failed / incomplete internal self-test
How to fix it — step by step
- Take the robot to an independent vacuum repair shop for inspection — Neato shut down in 2023, so its Customer Care no longer exists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.
Related Neato Robot vacuum Botvac 65 problems
- Please dust me off so I can see
- Please open my dirt bin & push switch DOWN to ON
- Please press OKAY to continue. Battery issue (0002)
- Please press OKAY to continue. Battery issue (0003)
- Please press OKAY to continue. Battery issue (0004)
- Please press OKAY to continue. Battery issue (0005)
- Please press OKAY to continue. Battery issue (0006)
- Please press OKAY to continue. Battery issue (0007)
- Please press OKAY to continue. Battery issue (0008)
- Please press OKAY to continue. Battery issue (0009)
- Please press OKAY to continue. Battery issue (8000)
- Please put me down on the floor