Neato Robot vacuum Botvac D10 Play Button LED - Red sustained
What this problem usually means
An error has occurred. The guide does not name the specific error in the LED table - it directs you to press the Info button to find out more about the error, and to use the error link in the MyNeato app.
Likely causes
- Unspecified robot error - specific cause is announced via the Info button / MyNeato app, not in the printed guide
How to fix it — step by step
- Press the Info button to hear / see what the error is
- Tap the error link in the MyNeato app for what the error means and what corrective action to take
- Follow that app guidance; if it cannot be cleared, take the robot to an independent vacuum repair shop — Neato shut down in 2023, so its Customer Care no longer exists
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.