Neato Robot vacuum XV Series Please press OKAY to continue. Battery issue (0004)

What this problem usually means

Battery issue 0004 on the XV series. The recovery procedure below is the one Neato support gave owners: it is a charge-system and gauge reset, not just 'recharge the battery'.

Likely causes

  1. Loose connections inside the charge base
  2. A battery gauge that has lost track of the packs after a fault
  3. Packs needing reconditioning cycles

How to fix it — step by step

  1. Check the charge base connections, including the internal ones, and clean the charge contacts
  2. Charge for at least 5 hours
  3. Hard reset: disconnect one battery (or switch off) for 3-5 minutes, then reconnect
  4. Select Menu > Support > New Battery
  5. Run 3 full charge and discharge cycles to relearn the packs

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: documented owner repair reports. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Neato Robot vacuum XV Series problems

See all Neato XV Series codes & guides →