Neato Robot vacuum XV Series Please press OKAY to continue. Battery issue (0003)

What this problem usually means

The battery is low or needs to be charged. Neato's support table groups codes 0003 and 0004 together with this same meaning.

Likely causes

  1. Battery discharged
  2. Battery too low to clean

How to fix it — step by step

  1. Press OKAY
  2. Put the robot on the charge base until the status light turns green
  3. If runtimes stay short after a full charge, recalibrate the batteries: Menu > Support > New Battery, then run full charge and discharge cycles
  4. If the issue persists, take the robot to an independent vacuum repair shop — Neato shut down in 2023, so its Customer Care and warranty service no longer exist

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Neato Robot vacuum XV Series problems

See all Neato XV Series codes & guides →