Neato Robot vacuum Botvac Connected My bumper is stuck. Please free it

What this problem usually means

The bumper or a bumper sensor is being triggered / stuck.

Likely causes

  1. Bumper jammed by debris
  2. Bumper sensor stuck

How to fix it — step by step

  1. Gently tap the bumper to free it - you should hear two clicks when the bumper is pressed, one when pressed in and one when released
  2. Check the bumper moves freely
  3. If the issue persists, take the robot to an independent vacuum repair shop — Neato shut down in 2023, so its Customer Care and warranty service no longer exist

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Neato Robot vacuum Botvac Connected problems

See all Neato Botvac Connected codes & guides →