Narwal Robot vacuum Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 61 codes covered.
Shop Narwal Robot vacuum parts at Amazon
All Robot vacuum codes across brands →
Finding your model number: it is on the underside label or in the app.
Narwal Freo
All Narwal Narwal Freo codes & guides → (38 covered)
- 1001 — Network connection failed. The robot cannot connect to Wi-Fi.
- 1002 — Network connection failed because the Wi-Fi password is incorrect.
- 1003 — Network connection failed.
- 1004 — System update failed.
- 1005 — The robot has already been registered to an account.
- 2001 — Mapping failed.
- 2002 — Mapping error.
- 2003 — Mapping failed.
- 2004 — The robot is trapped.
- 2005 — System error.
- 2006 — No map. The map has not been created.
- 2007 — Cannot find the base station.
- 2008 — Exiting the base station failed.
- 2009 — The robot is in a no-go zone.
- 2011 — The robot cannot be recalled while mapping.
- 2012 — Cannot build the map while cleaning.
- 2013 — Operation repeated while the robot is mapping.
- 3001 — Side brush malfunction.
- 3002 — Please install the dustbin.
- 3003 — Please check the dustbin, filter, and air vent.
- 3004 — Please install the vacuum module before mapping.
- 3005 — Please install the vacuum module / mopping module before cleaning.
- 3006 — Low battery power (below 20%).
- 3007 — Low battery power - not enough charge to start a task.
- 3008 — The robot was picked up.
- 3009 — Please check the LiDAR.
- 3010 — Please check the bumper.
- 3011 — Cliff sensor error.
- 3012 — The robot is in a strong magnetic field environment.
- 3013 — Battery malfunction - battery temperature too high or too low.
- 3014 — Wall sensor error.
- 3015 — Vacuuming motor malfunction.
- 3016 — Tire (drive wheel) malfunction.
- 3017 — Base station overflow.
- 3018 — Please check the clean water tank.
- 3019 — Please check the waste water tank.
- 3020 — Please check the washboard.
- 3022 — Base station error.
Narwal Freo X Plus
All Narwal Narwal Freo X Plus codes & guides → (8 covered)
- App shows robot offline — The app shows the Freo X Plus as offline and it cannot be controlled.
- Ineffective mopping — Mopping is ineffective / floors are not getting clean.
- Map not saved — The map created by the robot is not saved.
- Poor suction performance — Suction / vacuuming performance is poor.
- Robot cannot find the base station — The robot cannot find / return to its base station.
- Robot gets stuck frequently — The robot gets stuck frequently during cleaning.
- Robot not connecting to Wi-Fi — The robot will not connect to Wi-Fi.
- Robot not returning to base — The robot does not return to its base station.
Narwal Freo X Ultra
All Narwal Narwal Freo X Ultra codes & guides → (8 covered)
- 1009 / 1010 — Mop pad error on the Freo X Ultra (this code pair is listed in Narwal's robot-vacuum error index with Applicable Models: Freo Pro, Freo X…
- 2003 — Base station overflow - water has overflowed in the Freo X Ultra base station. Narwal's dedicated spotlight article uses the Freo X Ultra…
- App shows robot offline — The app shows the Freo X Ultra as offline.
- Base station cannot be turned on — The Freo X Ultra base station will not power on.
- Map created is incomplete — The map the robot created is incomplete - some rooms/areas are missing.
- Map not saved after mapping — The map is not saved after the robot finishes building it.
- Poor cleaning effect (sweeping) — The robot's sweeping/vacuuming cleaning effect is poor.
- Robot automatic shutdown — The robot shuts down automatically.
Narwal Freo Z
All Narwal Narwal Freo Z codes & guides → (7 covered)
- 1009 / 1010 — Mop pad error on the Freo Z Ultra (this code pair is listed in Narwal's robot-vacuum error index with Applicable Models: Freo Pro, Freo X…
- 2040 / 2041 / 2042 — Electrolyzed water module malfunction in the base station. The Freo Z Ultra base station has a built-in electrolyzed-water module for mop…
- App connectivity issues — The app cannot connect to / control the robot reliably.
- Base station not producing hot wash water — The base station wash water is not heating for mop washing. Narwal's base-station troubleshooting guide explicitly lists the Freo Z Ultra…
- Poor cleaning performance — Cleaning performance is poor.
- Robot gets stuck frequently — The robot gets stuck frequently during cleaning.
- Robot not charging — The Freo Z Ultra robot is not charging.