Narwal Robot vacuum Narwal Freo Z App connectivity issues

What this problem usually means

The app cannot connect to / control the robot reliably.

Likely causes

  1. Weak Wi-Fi signal
  2. Incorrect network settings (5GHz instead of 2.4GHz)

How to fix it — step by step

  1. Make sure your Wi-Fi is 2.4GHz.
  2. Restart your router, robot and phone.
  3. Re-pair the device in the app if necessary.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Narwal Robot vacuum Narwal Freo Z problems

See all Narwal Narwal Freo Z codes & guides →