Narwal Robot vacuum Narwal Freo X Plus Robot not connecting to Wi-Fi
What this problem usually means
The robot will not connect to Wi-Fi.
Likely causes
- Incorrect Wi-Fi band (5GHz instead of 2.4GHz) or password
- Weak Wi-Fi signal
How to fix it — step by step
- Make sure the router is set to 2.4GHz Wi-Fi.
- Verify the Wi-Fi password.
- Move the robot closer to the router.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.