Narwal Robot vacuum Narwal Freo 3011 Error Code
What the 3011 code means
Cliff sensor error.
Likely causes
- Dirty cliff sensors
- Cliff sensor fault
How to fix it — step by step
- Wipe the cliff sensors.
- If that does not work and there is no risk of falling, disable Anti-fall mode in the app (Device - More Features - Anti-fall mode) and try again.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the 3011 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.