Narwal Robot vacuum Narwal Freo X Plus Robot cannot find the base station

What this problem usually means

The robot cannot find / return to its base station.

Likely causes

  1. Base station has been moved
  2. Base station placed unevenly (power cord not seated in the cable groove, tilting the station)
  3. Strong direct sunlight on the base station interfering with locating

How to fix it — step by step

  1. Place the robot back into the base station and restart the task.
  2. Make sure the power cord is securely placed in the cable groove at the back of the base station and the station sits on a flat surface.
  3. Move the base station out of strong direct sunlight.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.

Related Narwal Robot vacuum Narwal Freo X Plus problems

See all Narwal Narwal Freo X Plus codes & guides →