Narwal Robot vacuum Narwal Freo X Ultra 2003 Error Code
What the 2003 code means
Base station overflow - water has overflowed in the Freo X Ultra base station. Narwal's dedicated spotlight article uses the Freo X Ultra as its example model.
Likely causes
- Cleaning tray dirty
- Water tank locking tabs not fully engaged
- Loose sealing strips / silicone seals on the clean or dirty water tank
- Use of another brand's fragrance or cleaning detergent causing excess foam
How to fix it — step by step
- Clean the base station and the cleaning tray first.
- Check both water tanks: make sure the locking tabs are fully engaged (a distinct click must be heard and felt when pressing the dirty water tank lid into place).
- Check the sealing strips of the clean and dirty water tanks; if loose, press them back into the sealing groove.
- Lift both water tanks and check the silicone seals are secure.
- Do not use any other brand of fragrance or cleaning detergent.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the 2003 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.