Narwal Robot vacuum Narwal Freo 3018 Error Code
What the 3018 code means
Please check the clean water tank.
Likely causes
- Clean water tank empty
- Rubber seal of the tank outlet damaged or fallen off
- Pipe in the tank not installed firmly
- Filter sponge installed incorrectly
How to fix it — step by step
- Check whether there is water in the clean water tank.
- Check whether the rubber of the clean water tank outlet is in good condition and has not fallen off.
- Check whether the pipe in the clean water tank is installed firmly.
- Check whether the filter sponge is installed correctly.
- Squeeze some water into the clean water tank outlet with tools and start the mopping task again.
- Unplug the base station for 2 minutes and plug it in again.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Clean water tank filter sponge.
Parts that commonly fix the 3018 code
- Clean water tank filter sponge - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.