Narwal Robot vacuum Narwal Freo 3005 Error Code
What the 3005 code means
Please install the vacuum module / mopping module before cleaning.
Likely causes
- Module installed incorrectly
- Module magnet not working
How to fix it — step by step
- Check that the vacuuming/mopping module is installed correctly.
- Check whether the magnet on the back of the module still works (the cleaning hook is magnetic - use it to test the module magnet).
- Remove the module and restart the robot.
- Reset the robot if the error persists.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the 3005 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.