Narwal Robot vacuum Narwal Freo 3017 Error Code
What the 3017 code means
Base station overflow.
Likely causes
- Waste water tank broken
- Excess foam at the bottom of the base station (too much detergent)
- Dirty overflow sensors
- Waste water tank cannot pump water
How to fix it — step by step
- Check whether the waste water tank is broken. → Shop the waste water tank at Amazon
- If there is a lot of foam at the bottom of the base station, clean it, wipe the sensors, and check the rubbers where the waste water tank sits; unplug the base station and plug it in again. Do not use too many detergent sheets.
- If there is no water at the bottom, wipe the sensors.
- If there is water at the bottom and the waste water tank cannot pump water, contact Narwal support with a video of the issue plus your serial number and app ID.
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Waste water tank.
Parts that commonly fix the 3017 code
- Waste water tank - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.