Narwal Robot vacuum Narwal Freo X Ultra Poor cleaning effect (sweeping)
What this problem usually means
The robot's sweeping/vacuuming cleaning effect is poor.
Likely causes
- Dust bin and filter dirty
- Hair built up on the roller brush and side brushes
- Dust bag full
How to fix it — step by step
- Clean the dust bin and filter regularly. → Shop the filter at Amazon
- Clear hair from the roller brush and side brushes.
- Check whether the dust bag is full and replace it in time if so. → Shop the dust bag at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Dust bag.
Also tied to this fault: Filter - Shop at Amazon
Parts that commonly fix it
- Dust bag - Shop at Amazon
- Filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.