Lennox Furnace Residential Communicating Systems alert codes — EL296/SL280/SLP98/ML296 and similar E223 Error Code
What the E223 code means
On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E223 means the low pressure switch is open — it failed to close to prove draft (seven-segment wording: pressure switch failed open).
Likely causes
- Blocked vent or combustion-air intake
- Frozen or clogged condensate drain
- Weak inducer motor → Shop the inducer motor at RepairClinic
- Cracked pressure hose or failed switch
How to fix it — step by step
- Clear snow, ice, leaves or debris from the outdoor vent and intake
- Check the condensate drain and trap for clogs or freezing
- Reset power once (off 30 seconds, then on)
- Call a technician if it returns, to test the inducer and pressure switch — do not bypass the switch → Shop the pressure switch at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the pressure switch.
Shop the pressure switch at RepairClinic or Amazon
Also tied to this fault: inducer motor - Shop at RepairClinic or Amazon
Parts that commonly fix the E223 code
- pressure switch - Shop at RepairClinic or Amazon
- inducer motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.