Lennox Furnace Residential Communicating Systems alert codes — EL296/SL280/SLP98/ML296 and similar E292 Error Code
What the E292 code means
On newer Lennox furnaces (EL296, SL280, SLP98, ML296 and similar) showing three-digit codes from the Lennox Residential Communicating Systems Alert Code Guide, E292 is a Watchguard fault — the indoor blower motor will not start.
Likely causes
- Seized or obstructed blower wheel
- Failed blower motor
- Blower power or communication fault
How to fix it — step by step
- Turn power off and check the filter is not collapsed into the blower path
- Confirm the breaker is on and the blower door is seated
- Reset power once
- Call a technician if the blower still will not start — motor replacement is pro work → Shop the blower motor at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the blower motor.
Parts that commonly fix the E292 code
- blower motor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number inside the blower/burner compartment door. It's the key to the right manual pages and the right parts.