Goodman Air Conditioner H8 Error Code

What the H8 code means

High line voltage, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet two-stage air conditioners and heat pumps (GSXC/GSZC series, IOG-4009). The control detects line voltage greater than 255 VAC; the unit may appear to operate normally and the fault clears if voltage drops below 255 VAC.

Likely causes

  1. High utility line voltage
  2. Unit connected to a power supply that does not match the rating plate

How to fix it — step by step

  1. Verify the unit is connected to the power supply specified on the rating plate
  2. Correct the high line voltage condition; contact the local utility if needed
  3. Turn power OFF before any repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the H8 code

No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Goodman Air Conditioner error codes

See all Goodman Air Conditioner codes & guides →