Goodman Air Conditioner A2 Error Code
What the A2 code means
Outdoor air temperature sensor fault, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet two-stage air conditioners and heat pumps (GSXC/GSZC series, Installation & Service Reference IOG-4009). The sensor is shorted, open, disconnected or out of range, and the unit fails to operate.
Likely causes
- Shorted outdoor air temperature sensor → Shop the outdoor air temperature sensor at RepairClinic
- Open or disconnected sensor
- Sensor out of range
How to fix it — step by step
- Turn power OFF to the outdoor unit before repair, as Goodman directs
- Check the sensor connection at the outdoor control board
- Replace the open/shorted sensor with the correct replacement part
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the Outdoor air temperature sensor.
Shop the Outdoor air temperature sensor at RepairClinic or Amazon
Parts that commonly fix the A2 code
- Outdoor air temperature sensor - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.