Goodman Air Conditioner 09 Error Code
What the 09 code means
Low pilot (secondary) voltage, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet two-stage air conditioners and heat pumps (GSXC/GSZC series, IOG-4009). The control detects secondary voltage less than 18 VAC; the fault clears if secondary voltage rises above 21 VAC.
Likely causes
- Transformer overloaded
- Low line voltage
How to fix it — step by step
- Check the low-voltage fuse → Shop the low-voltage fuse at RepairClinic
- Have a technician correct the low secondary voltage condition and test/replace the transformer if needed
- Turn power OFF before repair
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the Control transformer.
Shop the Control transformer at RepairClinic or Amazon
Also tied to this fault: Low-voltage fuse - Shop at RepairClinic or Amazon
Parts that commonly fix the 09 code
- Control transformer - Shop at RepairClinic or Amazon
- Low-voltage fuse - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.