Goodman Air Conditioner L8 Error Code
What the L8 code means
Low line voltage / no line voltage, shown on the 7-segment display of the outdoor unit's integrated (unitary) control board on Goodman ComfortNet two-stage air conditioners and heat pumps (GSXC/GSZC series, IOG-4009). The control detects line voltage less than 185 VAC; the fault clears if line voltage rises above 185 VAC.
Likely causes
- Low utility line voltage
- Tripped breaker or blown fuse partially feeding the unit
- Unit connected to a power supply that does not match the rating plate
How to fix it — step by step
- Check circuit breakers and fuses for the outdoor unit
- Verify the unit is connected to the power supply specified on the rating plate
- Correct the low line voltage condition; contact the local utility if needed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the L8 code
No specific replacement part is documented for this fault. If the checks above do not clear it, the machine likely needs to be disassembled and an internal part replaced - and since the manufacturer publishes no procedure for that, it is the point where most owners hand it to a repair shop.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Goodman manual is on Goodman's support site — you'll need your model number.
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.