Frigidaire Washer Front-Load (Affinity) E43 Error Code
What the E43 code means
The control detects a problem with the door lock circuit.
Likely causes
- Failed door lock assembly → Shop the door lock assembly at RepairClinic
- Damaged door lock wiring
- Control board fault in the lock circuit
How to fix it — step by step
- Close the door firmly and try restarting the cycle
- Unplug the washer for 5 minutes and try once more
- If E43 returns, do not force the door or bypass the lock
- Book service to test the door lock circuit
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the door lock assembly.
Shop the door lock assembly at RepairClinic or Amazon
Also tied to this fault: main control board - Shop at RepairClinic or Amazon
Parts that commonly fix the E43 code
- door lock assembly - Shop at RepairClinic or Amazon
- main control board - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.