Frigidaire Washer Front-Load (Affinity) EF1 Error Code

What the EF1 code means

The drain pump is clogged, so water cannot leave the tub properly.

Likely causes

  1. Coins, lint or debris in the pump filter
  2. Object stuck in the drain pump
  3. Blocked drain hose

How to fix it — step by step

  1. Unplug the washer and put towels and a shallow pan down
  2. Open the pump access and clean out the filter and pump housing → Shop the drain pump at RepairClinic
  3. Check the drain hose for blockages
  4. Run a drain and spin cycle to confirm it clears

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the EF1 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Frigidaire Washer Front-Load (Affinity) error codes

See all Frigidaire Front-Load (Affinity) codes & guides →