Frigidaire Washer Front-Load (Affinity) E52 Error Code

What the E52 code means

Bad signal from the drive motor tachometer: the control cannot read the motor speed correctly.

Likely causes

  1. Failed motor tachometer
  2. Loose motor wiring harness
  3. Drive motor failure → Shop the drive motor at RepairClinic
  4. Motor control board fault

How to fix it — step by step

  1. Unplug the washer for 5 minutes and restart
  2. Take out part of an oversized load and try again
  3. If the drum will not turn or the code returns, stop the washer
  4. Book service to test the motor and tachometer

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E52 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.

Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.

Related Frigidaire Washer Front-Load (Affinity) error codes

See all Frigidaire Front-Load (Affinity) codes & guides →