Frigidaire Washer Front-Load (Affinity) E21 Error Code
What the E21 code means
Water is not pumping out fast enough: the washer drains too slowly and pauses with water left in the tub.
Likely causes
- Clogged drain pump filter
- Drain hose kinked or blocked
- Blocked standpipe or house drain
- Weak or failed drain pump
How to fix it — step by step
- Unplug the washer and put towels down
- Clean the drain pump filter behind the lower front panel → Shop the drain pump at RepairClinic
- Check the drain hose for kinks and clear the standpipe
- Restart; if it still drains slowly, the drain pump may need replacing
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the drain pump.
Parts that commonly fix the E21 code
- drain pump - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.
Find your model number inside the door rim or on the back panel. It's the key to the right manual pages and the right parts.