Bosch Oven Error Codes
Find your code in the list below. Each page explains what the code means, the most likely causes, step-by-step fixes you can do yourself, and the parts that commonly resolve it. 23 codes covered.
Shop Bosch Oven parts at RepairClinic or Amazon
All Oven codes across brands →
Finding your model number: it is on the frame inside the oven door or behind the storage drawer.
300 / 500 / 800 Series built-in wall ovens
All Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides → (12 covered)
- E000 — Wrong module combination on 300, 500 and 800 Series built-in wall ovens: the control module and user interface are mismatched, usually…
- E003 — The electronics are too hot on 300, 500 and 800 Series built-in wall ovens: the user interface temperature exceeds about 185F / 85C and…
- E009 — ROM check error in the user interface on 300, 500 and 800 Series built-in wall ovens: the interface is not getting all information from the…
- E010 — Data memory error in the user interface on 300, 500 and 800 Series built-in wall ovens: a memory check or write failed and all heating…
- E011 — A single key is being read as pressed continuously on built-in ovens - in the wall oven service manual this is a key pressed for about 10…
- E104 — The cavity 1 temperature sensor is shorted on 300, 500 and 800 Series built-in wall ovens (E204 is the same fault for cavity 2). Heating…
- E106 — The cavity 1 door latch does not lock on 300, 500 and 800 Series built-in wall ovens (E206 is the same fault for cavity 2), so modes that…
- E107 — The cavity 1 door latch does not unlock on 300, 500 and 800 Series built-in wall ovens (E207 is the same fault for cavity 2) - the door may…
- E115 — The temperature in the unlocked cavity is too high on 300, 500 and 800 Series built-in wall ovens (E215 is the same fault for cavity 2). UK…
- E118 — Cooling fan supervision error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E218 for cavity 2): the cooling fan speed is too…
- E124 — Door switch error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E224 for cavity 2): the door switch is in an undefined…
- E303 — The electronics are too hot at the control module on 300, 500 and 800 Series built-in wall ovens: the control module temperature exceeds…
Electric freestanding ranges
All Bosch Electric freestanding ranges codes & guides → (1 covered)
- E100 — An electronics fault on Bosch electric freestanding ranges. The code reports a general electronics problem and does not by itself identify…
Ovens & microwaves (Bosch Canada general error-code list)
All Bosch Ovens & microwaves (Bosch Canada general error-code list) codes & guides → (1 covered)
- E11 — The touch keys are not operating properly on Bosch ovens and microwaves, which Bosch Canada says may be due to condensation on the keypad.…
Ranges (Sears PartsDirect chart)
All Bosch Ranges (Sears PartsDirect chart) codes & guides → (5 covered)
- F121 — A key on the control panel is stuck on Bosch ranges in the Sears PartsDirect list. The control reads a continuous key press and will not…
- F151 — Electronic control board failure or a communication error on Bosch ranges in the Sears PartsDirect list.
- F154 — The electronic control board is too hot on Bosch ranges in the Sears PartsDirect list.
- F31 — Oven temperature sensor failure on Bosch ranges in the Sears PartsDirect list (upper or single oven sensor). The control cannot read oven…
- F41 — The oven door latch will not lock on Bosch ranges in the Sears PartsDirect list, so self-clean cannot start.
Other codes & guides
- E005 — Communication error: the user interface has lost communication with the control module (power board) at start-up. Freestanding Bosch ranges…
- E101 — The oven temperature sensor is malfunctioning. On freestanding ranges Bosch lists e101 as the appliance temperature sensor fault; in the…
- E126 — Door latch error: on built-in wall ovens E126 is a cavity 1 door latch in an undefined state (E226 for cavity 2), and freestanding Bosch…
- E302 — The control module / power board has overheated. In the 800 Series wall oven service information E302 is a control module that is too hot -…