Bosch Oven 300 / 500 / 800 Series built-in wall ovens E009 Error Code
What the E009 code means
ROM check error in the user interface on 300, 500 and 800 Series built-in wall ovens: the interface is not getting all information from the control module at start-up.
Likely causes
- loss of communication with the control module
- disconnected wire in the unit
- failed user interface memory → Shop the user interface at RepairClinic
How to fix it — step by step
- Turn the oven off at the breaker for 30 seconds and restore power
- If the code returns, stop using the oven
- Book a technician - the interface usually needs replacing
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the user interface.
Parts that commonly fix the E009 code
- user interface - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Bosch Oven 300 / 500 / 800 Series built-in wall ovens error codes
See all Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides →