Bosch Oven 300 / 500 / 800 Series built-in wall ovens E303 Error Code
What the E303 code means
The electronics are too hot at the control module on 300, 500 and 800 Series built-in wall ovens: the control module temperature exceeds about 212F / 100C. This is the control-module counterpart to E003 at the user interface.
Likely causes
- control module overheating
- cooling fan failure or blocked airflow
- long self-clean or high-temperature use
How to fix it — step by step
- Turn the oven off and let it cool completely
- Check the vents around the control area are clear
- If the code returns in normal use, book a technician to check the cooling fan and control module → Shop the control module at RepairClinic → Shop the cooling fan at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the control module.
Shop the control module at RepairClinic or Amazon
Also tied to this fault: cooling fan - Shop at RepairClinic or Amazon
Parts that commonly fix the E303 code
- control module - Shop at RepairClinic or Amazon
- cooling fan - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Bosch Oven 300 / 500 / 800 Series built-in wall ovens error codes
See all Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides →