Bosch Oven 300 / 500 / 800 Series built-in wall ovens E118 Error Code

What the E118 code means

Cooling fan supervision error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E218 for cavity 2): the cooling fan speed is too low or too high, or its Hall effect sensor is not detecting rotation.

Likely causes

  1. cooling fan failing or obstructed
  2. wire harness touching the motor or pinched
  3. Hall effect sensor connection loose → Shop the hall effect sensor at RepairClinic
  4. plenum touching the fan end cap

How to fix it — step by step

  1. Turn the oven off at the breaker for 30 seconds and restore power
  2. Listen for the cooling fan after use; if it is silent or noisy and the code returns, stop using high-temperature modes → Shop the cooling fan at RepairClinic
  3. Book a technician to check the fan, harness and Hall sensor

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the E118 code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.

Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.

Related Bosch Oven 300 / 500 / 800 Series built-in wall ovens error codes

See all Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides →