Bosch Oven Ovens & microwaves (Bosch Canada general error-code list) E11 Error Code
What the E11 code means
The touch keys are not operating properly on Bosch ovens and microwaves, which Bosch Canada says may be due to condensation on the keypad. Note this two-digit E11 is different from E011 on built-in ovens.
Likely causes
- condensation or moisture on the keypad
- dirty control panel
- touch key fault
How to fix it — step by step
- Clean the control panel with a dry cloth
- Disconnect the appliance from the power supply by switching off the fuse or breaker, and switch it back on after 10 seconds
- If the keys still misbehave, book a technician
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix the E11 code
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Bosch Oven Ovens & microwaves (Bosch Canada general error-code list) error codes
See all Bosch Ovens & microwaves (Bosch Canada general error-code list) codes & guides →