Bosch Oven 300 / 500 / 800 Series built-in wall ovens E124 Error Code
What the E124 code means
Door switch error for cavity 1 on 300, 500 and 800 Series built-in wall ovens (E224 for cavity 2): the door switch is in an undefined state, so the oven cannot tell if the door is open or closed.
Likely causes
- failed door switch
- door not closing fully
- switch wiring fault
How to fix it — step by step
- Open and firmly close the door, checking nothing is trapped in the seal
- Turn the oven off at the breaker for 30 seconds and try again
- If the code returns, book a technician for the door switch → Shop the door switch at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the door switch.
Parts that commonly fix the E124 code
- door switch - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Bosch Oven 300 / 500 / 800 Series built-in wall ovens error codes
See all Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides →