Bosch Oven 300 / 500 / 800 Series built-in wall ovens E003 Error Code
What the E003 code means
The electronics are too hot on 300, 500 and 800 Series built-in wall ovens: the user interface temperature exceeds about 185F / 85C and heating is stopped to protect it.
Likely causes
- user interface overheating
- cooling fan not running or vents blocked
- long high-temperature or self-clean use heating the control area
How to fix it — step by step
- Turn the oven off and let it cool completely with the door closed
- Make sure nothing is blocking the vents above and below the control panel
- Try again once cool; if E003 returns in normal use, book a technician to check the cooling fan → Shop the cooling fan at RepairClinic
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the cooling fan.
Parts that commonly fix the E003 code
- cooling fan - Shop at RepairClinic or Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Bosch manual is on Bosch's support site — you'll need your model number.
Find your model number on the frame inside the oven door or behind the storage drawer. It's the key to the right manual pages and the right parts.
Related Bosch Oven 300 / 500 / 800 Series built-in wall ovens error codes
See all Bosch 300 / 500 / 800 Series built-in wall ovens codes & guides →